Technical Data; Pvg 100 Technical Data; Pvh, Hydraulic Actuation - Danfoss PVG 100 Technical Information

Technical Information

Technical data

PVG 100 technical data

PVG 100 technical data
Max. pressure
Oil flow, rated
(See characteristics)
Spool travel, standard
Spool travel, float
position spool P→A→F
Dead band,
flow control spools
Max. spool leakage
at 100 bar [1450 psi] and
2
21 mm /s [102 SUS]
Max. internal leakage with pilot operated check
valve at 200 bar [2900 psi] and
2
21 mm /s [102 SUS]
Oil temperature
(inlet temperature)
Oil viscosity
Ambient temperature
Filtration / Max. contamination (ISO 4406)

PVH, hydraulic actuation

PVG 100 Proportional Valve Group
The technical data for PVG 100 are typical measured results. For the hydraulic system a mineral based
hydraulic oil with a viscosity of 21 mm2/s [102 SUS] and a temperature of 50 °C [122 °F] was used.
Port P continuous
Port P intermittent
2)
Port A/B
Port T, static / dynamic
Port T0, static / dynamic
Port P (PVPV / PVPVM)
Port A/B, with press. comp.
@15 bar [217psi]
Proportional range
Float position
Standard
A/B→T, without shock valve
A/B→T, with shock valve
A/B→T, without shock valve
A/B→T, with shock valve
Recommended temperature
Min. temperature
Max. temperature
Operating range
Min. viscosity
Max. viscosity
1)
Intermittent operation: the permissible values may occur for max. 10% of every minute.
2)
PVG 100-HF - 350 bar [5075 psi] rated for 250 000 cycles, max. continuous pressure 320 bar [4640 psi].
3)
PVG 100-HF - High Flow option work section.
PVH, hydraulic actuation data
Regulation pressure range
Max. pilot pressure
1)
Max. pressure on port T
1)
The PVRHH remote control (hydraulic joystick) lever should be connected directly to tank.
520L0720 • Rev EB • Jan 2014
1)
3)
3)
3)
5 – 15 bar
30 bar
10 bar
350 bar [5075 psi]
400 bar [5800 psi]
350 bar [5075 psi]
25 bar/40 bar [365/580 psi]
5 bar/10 bar [75/145 psi]
250/400 l/min [66/106 US gal/min]
180 l/min [47.6 US gal/min]
240 l/min [63.4 US gal/min]
± 7 mm [±0.28 in]
A: 5.5 mm A: [±0.22 in]
B: 7.0 mm B: [±0.28 in]
8 mm [±0.32 in]
± 1.5 mm [±0.06 in]
3
20/30 cm /min [1.22/1.85 in
3
25/35 cm /min [1.53/2.14 in
3 3
1 cm /min [0.06 in
3 3
6 cm /min [0.37 in
30 → 60°C [86 → 140°F]
-30°C [–22°F]
+90°C [194°F]
2
12 - 75 mm /s [65 - 347 SUS]
2
4 mm /s [39 SUS]
2
460 mm /s [2128 SUS]
-30 → +60°C [–22 → +140°F]
23/19/16
[75 – 220 psi]
[435 psi]
[145 psi]
3
/min]
3
/min]
/min]
/min]
25