Pvb - Basic Module; Actuation Module - Danfoss PVG 100 Technical Information

Technical Information
General Information
8
PVG 100 Proportional Valve Group
PVB – basic module
•
Integrated pilot operated check valves in A and B work ports for low internal leakage
•
Integrated pressure compensator
•
Interchangeable spools
•
Single and Dual Shock/suction valves for A and B ports
•
Different interchangeable spool variants
•
All versions suitable for mechanical, hydraulic and electrical actuation
•
Versions:
‒ PVG100-HF (High Flow) version for less total pressure loss at increased flow
End module version for extra space savings
‒
Open spool-end version for extended mechanical actuation possibilities
‒

Actuation module

The basic module is always fitted with mechanical actuator PVM, which can be combined with the
following as required:
•
Electrical actuator (11 – 32 V
PVES – proportional, Super
‒
PVEH – proportional, high performance
‒
PVEH-F – proportional high performance, Float
‒
PVEA – proportional low hysteresis (not recommended for PVG 100-HF High Flow)
‒
‒ PVEM – proportional, medium performance
‒ PVEO – ON/OFF
‒ PVEU – proportional, voltage control, 0-10 V
‒ PVED-CC – Digital CAN controlled J1939/ISOBUS
‒ PVED-CX – Digital CAN controlled CAN open extra vehicle system safety
‒ PVEP – PVM controlled (11-32 V)
‒ PVHC – High Current actuator for PVG
•
PVMD, cover for Mechanical actuation
•
PVMR, cover for Mechanical detent (not compatible with PO check modules)
•
PVMF, cover for Mechanical Float (not compatible with PO check modules)
•
PVH, cover for Hydraulic actuation.
520L0720 • Rev EB • Jan 2014
):
AC/DC