Order Specification; Please State; Standard And Option Assembly; Reordering - Danfoss PVG 100 Technical Information

Technical Information

Order specification

Please state

Standard and option assembly

Reordering

PVG 100 Proportional Valve Group
An order form for Danfoss PVG 100 hydraulic valve is shown on the next page. The form can be obtained
from the Danfoss Sales Organization.
Both the module selection chart on the previous pages and the order form are divided into fields 0, 1-10,
11, 12, 13, a, b, and c.
Each module has its own field:
0: Pump side module PVP
Plug for external pilot oil supply PVPC
Electrical unloading valve PVPE
Electrical pilot shut off valve PVPE
1-10: Basic valves PVB
13: Main spool PVBS
a: Mechanical actuator PVM
c: Cover for mechanical actuation PVMD
Cover for hydraulic actuation PVH
Electrical actuators PVE
b: Shock and suction valve PVLP
Suction valve PVLA
11: End plate PVSI
Tank module PVT
Interface module PVTI
12: Assembly kit PVAS
•
Code numbers of all modules required
•
Required setting (P) for pump side module
The PVG 100 valve group is assembled the way the module selection chart shows if the code number for
PVM is written in field a, and the code number for PVMD, PVE or PVH in field c.
The valve group is assembled so that the mechanical actuator is mounted on the opposite end of the
basic module, if the code number for PVM is written in field c of the order form and the code numbers for
PVMD, PVE or PVH in field a.
The space at the top right-hand corner of the form is for Danfoss to fill in.
The code number for the whole of the specified valve group (PVG No.) is entered here.
In the event of a repeat order all you have to do is enter the number Danfoss has given on the initial
confirmation of order.
520L0720 • Rev EB • Jan 2014 65