Technical Data; Pvg 100 Technical Data; Pvh, Hydraulic Actuation - Danfoss PVG 100 Technical Information

Technical Information
PVG 100 Proportional Valve Group

Technical data

PVG 100 technical data

PVG 100 technical data
Max. pressure
Oil flow, rated
(See characteristics)
Spool travel, standard
Spool travel, float
position spool P→A→F
Dead band,
flow control spools
Max. spool leakage
at 100 bar [1450 psi] and
2
21 mm /s [102 SUS]
Max. internal leakage with pilot operated check
valve at 200 bar [2900 psi] and
2
21 mm /s [102 SUS]
Oil temperature
(inlet temperature)
Oil viscosity
Ambient temperature
Filtration / Max. contamination (ISO 4406)
1)
Intermittent operation: the permissible values may occur for max. 10% of every minute.
2)
PVG 100-HF - 350 bar [5075 psi] rated for 250 000 cycles, max. continuous pressure 320 bar [4640 psi].
3)
PVG 100-HF - High Flow option work section.

PVH, hydraulic actuation

© Danfoss | May 2018
The technical data for PVG 100 are typical measured results. For the hydraulic system a mineral based
hydraulic oil with a viscosity of 21 mm
Port P continuous
Port P intermittent
2)
Port A/B
Port T, static / dynamic
Port T0, static / dynamic
Port P (PVPV / PVPVM)
Port A/B, with press. comp.
@15 bar [217psi]
Proportional range
Float position
Standard
A/B→T, without shock valve
A/B→T, with shock valve
A/B→T, without shock valve
A/B→T, with shock valve
Recommended temperature
Min. temperature
Max. temperature
Operating range
Min. viscosity
Max. viscosity
PVH, Hydraulic Actuation
PVH data
Control range
Maximum pilot pressure, static
Maximum pressure on port T
(It is recommended that the tank connection from the hydraulic remote control unit
PVRH is taken directly to tank.)
2
/s [102 SUS] and a temperature of 50 °C [122 °F] was used.
1)
3)
3)
3)
350 bar [5075 psi]
400 bar [5800 psi]
350 bar [5075 psi]
25 bar/40 bar [365/580 psi]
5 bar/10 bar [75/145 psi]
250/400 l/min [66/106 US gal/min]
180 l/min [47.6 US gal/min]
240 l/min [63.4 US gal/min]
± 7 mm [±0.28 in]
A: 5.5 mm A: [±0.22 in]
B: 7.0 mm B: [±0.28 in]
8 mm [±0.32 in]
± 1.5 mm [±0.06 in]
3
20/30 cm /min [1.22/1.85 in
3
25/35 cm /min [1.53/2.14 in
3
1 cm /min [0.06 in
3
6 cm /min [0.37 in
30 → 60°C [86 → 140°F]
-30°C [–22°F]
+90°C [194°F]
2
12 - 75 mm /s [65 - 347 SUS]
2
4 mm /s [39 SUS]
2
460 mm /s [2128 SUS]
-30 → +60°C [–22 → +140°F]
23/19/16
Pressure, bar [psi]
5 to 15 [75 to 220]
30 [435]
10 [145]
520L0720 | BC00000039en-US0502 | 25
3
/min]
3
/min]
3
/min]
3
/min]