Dexter Laundry T-350 Parts & Service Manual page 42

5)
the SELECT/ENTER touch pad switch is pressed and released, the dry time L.E.D. will
switch off, the dry cycle L.E.D. and programming L.E.D. will remain on, the temperature
L.E.D. will illuminate, and the drying temperature will be shown on the 4-digit numeric display.
6)
change the drying temperature. Each press and release of either the UP or DOWN touch pad
switch will either increase or decrease, respectively, the temperature by five degrees Fahren
heit or three degrees Celsius, depending on how your dryer controller is set up. Once either the
UP or DOWN touch pad switch is pressed, the temperature L.E.D. and the drying temperature
on the 4-digit numeric display will flash. If you pres and hold down either the UP or DOWN touch
pad switch, you will increment (UP arrow) or decrement (DOWN arrow) your way through the
available drying temperatures (105° Fahrenheit or 41° Celsius, up to 195° Fahrenheit or 90°
Celsius). If you do not want to change the drying temperature, do not press either the UP or
DOWN touch pad switch. Go to the next step.
7)
SELECT/ENTER touch pad switch is pressed and released, the temperature L.E.D. will switch
off, the dry cycle L.E.D. and programming L.E.D. will remain on, the cool down L.E.D. will
illuminate, and the cool down time will be shown on the 4-digit numeric display.
8)
to change the cool down time. Once either the UP or DOWN touch pad switch is pressed,
the temperature L.E.D. and the cool down time on the 4-digit numeric display will flash. If
you press and hold down either the UP or DOWN touch pad switch, you will increment (UP
arrow) or decrement (DOWN arrow) through the cool down times available (2 through 60
minutes if the controller has a red dot sticker or 2 through 15 minutes if the controller has no
red dot sticker). To not change the cool down time, do not press either the UP or DOWN
touch pad switch. Go to the next step.
9)
the SELECT/ENTER touch pad switch is pressed and released, the cool down L.E.D. and the
programming L.E.D. will switch off, the dry cycle L.E.D. will remain on, and the flashing
cool down time on the 4-digit display will stop flashing and remain.
10)
a) You can perform the modified dry cycle by pressing and releasing the START touch pad switch
on the dryer controller touch pad. If you start the modified cycle, the total dry time will appear
on the 4-digit numeric display and it will count down to 0 as the dry cycle progresses.
b) You can clear the modified dry cycle program by pressing and releasing the STOP touch pad
switch. If you choose to clear the modified dry cycle, the 4-digit numeric display will change to
"LOAd".
42
Part # 8533-104-001 1/18
Press and release the SELECT/ENTER touch pad switch on the dryer controller. Once
Press and release either the UP or DOWN touch pad switch on the dryer controller to
Press and release the SELECT/ENTER touch pad switch on the dryer controller. Once the
Press and release either the UP or DOWN touch pad switch on the dryer controller
Press and release the SELECT/ENTER touch pad switch on the dryer controller. Once
At this point, you have two choices: