Dexter Laundry T-350 Parts & Service Manual page 38

STOP
START
LOAd This message is displayed after a dry cycle is complete and the dryer
loading door has been opened or the STOP touch pad switch on the dryer
controller has been pressed and released twice.
donE This message blinks immediately after completion of the dry cycle and
continues to blink until the STOP touch pad switch on the dryer controller
is pressed or the dryer loading door is opened.
Prog This message is displayed when entering the permanent programming
mode.
.15 This message appears while the dryer is in the heating time of a dry cycle.
The decimal point will blink if the output for the gas valve is on, or remain
on constantly if the output for the gas valve is not on. The number repre-
sents the total time left in the dry cycle (includes cool down time).
C02 This message appears when the cool down time of the dry cycle is
reached. The letter "C" represents the cool down (non-heating) part of
the dry cycle. The number(s) after the letter "C" represent(s) the total
time remaining in the dry cycle.
F5 This message appears if there is a dryer fault. The letter "F" indicates a
fault and the number after the "F" represents the specific fault that has oc-
curred. There are five different faults that can appear (F1 through F5).
rEv This message is displayed while in the programming mode, to indicate the
reversing function during the dry cycle.
nrEv This message is displayed, while the programming mode, to indicate the
nonreversing function during the dry cycle.
38
Part # 8533-104-001 1/18
This touch pad switch will stop the dryer during a dry cycle without clear
ing the present drying cycle if pressed once. If pressed and released
twice, consecutively, the present dry cycle will be cleared.
This touch pad switch will start the operation of a dry cycle if pressed
and released once. Pressing and holding this touch pad switch will display the
current temperature of the dryer heat sensor as long as it is held in the depressed
position.
4-DIGIT NUMERICAL DISPLAY MESSAGES
Description