Component List - Mitsubishi Q Series User Manual

2 SYSTEM CONFIGURATION

2.2 Component list

No. Product
2
1 Positioning module
GX Developer
2
GX Configurator-PT SW D5C-QPTU-E
3 Personal computer
4 RS-232 cable
5 USB cable
6 Drive unit
Connection cable
7 (for connection of
QD70 and drive unit)
2 - 2
A positioning system using the QD70 consists of the following components.
Type
QD70P4
QD70P8
SW D5C-GPPW-E
For details, refer to the GX Developer Operating Manual and
"CHAPTER 6 UTILITY PACKAGE (GX Configurator-PT)".
DOS/V personal (User-prepared)
computer Refer to the GX Developer Operating Manual for details.
(User-prepared)
RS-232 cable for connection of the CPU module and DOS/V personal
QC30R2
computer.
Refer to the GX Developer Operating Manual for details.
(User-prepared)
USB cable for connection of the CPU module and DOS/V personal
–
computer.
Refer to the GX Developer Operating Manual for details.
(User-prepared)
–
Refer to the drive unit manual for details.
(User-prepared)
Cable for connection of the QD70 and drive unit or mechanical system
– input signals.
(To be fabricated in reference to the connected device manual and
Section 3.4.2)
Remarks
QD70P
No. of control axes
P Open collector output type
MELSEC-Q
2 - 2