Install The Fst Module - Xylem FST Installation, Operation And Maintenance Manual

3 Mechanical Installation
2. Drill a 25.4 mm (1 in) diameter hole 127 mm (5 in) below the
6.35 mm (0.25 in) diameter holes.
3. Install a cable gland or a grommet on the 25.4 mm (1 in) diameter hole.
4. Route the cable harness through the 25.4 mm (1 in) hole.

3.4 Install the FST module

1. Install the following on the mounting frame:
– the mounting bracket
– the two flat washers
– the two hexagon head bolts
2. Install the four isolators on the mounting bracket.
3. Install the FST module on the four isolators.
4. Tighten the four hexagon nuts on the isolators.
10
∅ 25.4 mm
(1 in)
FST Installation, Operation, and Maintenance Manual
∅ 6.35 mm
(0.25 in)
111.1 mm
12.7 mm
(4.375 in)
(0.5 in)
238.1 mm
(9.375 in)
127 mm
(5 in)
50.8 mm
(2 in)