Connect A Fuel Level Transducer - Xylem FST Installation, Operation And Maintenance Manual

1. Discharge pressure transducer
2. Control panel
3. Red wire
4. Black wire
2. Set the parameters for the discharge pressure transducer on the control
panel.
See

4.8 Connect a fuel level transducer

Select a fuel level transducer
1. Remove the fuel gauge from the fuel tank.
2. Insert a measuring tape into the fuel tank from the fuel gauge opening.
3. Measure from the bottom of the fuel tank to the top of the fuel gauge
opening.
FST Installation, Operation, and Maintenance Manual
2
1
Set the parameters for the discharge pressure transducer
3
4
4 Electrical Installation
on page 26.
19