Connect A Flowmeter To The Control Panel - Xylem FST Installation, Operation And Maintenance Manual

4 Electrical Installation
1. FST module
2. I/O extension cable for the FST module
3. Wiring harness for the FST module
4. Control panel
5. Spliced terminals that connect to relays, analog signal devices, or digital signal
6. HDP26 connector
7. HDP24 connector

4.5 Connect a flowmeter to the control panel

1. Connect the signal isolator to the control panel.
2. Set the DIP switch 7 to the ON position.
3. Connect the signal isolator to a flowmeter.
Red wire
Black wire
16
1
6
2
devices
Wire color Flowmeter
Analog output +
Analog output -
FST Installation, Operation, and Maintenance Manual
4
7
3
Signal isolator
I+
GND
5