1. Circular connector, connects to the FST module
2. Wiring harness for the FST module
3. Key switch
4. Control panel
4.4 Connect the I/O extension cable
1. Connect the female connector of the I/O extension cable to the FST module.
2. Connect the other connector of the I/O extension cable to the circular
connector of the wiring harness.
3. Connect the spliced terminals of the wiring harness to the control panel.
For more information regarding pin connection, see
harness to the control panel
4. As applicable, connect the spliced terminals of the I/O extension cable to the
following:
– Relays
– Analog signal devices
– Digital signal devices
FST Installation, Operation, and Maintenance Manual
4
1
2
IGN
on page 14.
ST
BAT
3
ACC
4 Electrical Installation
Connect the wiring
15