Xylem FST Installation, Operation And Maintenance Manual page 22

4 Electrical Installation
1. Fuel tank
2. Fuel fill
3. Fuel gauge
4. Record the measurement.
The height of the sensor blade of the fuel level transducer must be slightly
smaller than the depth of the tank.
5. To determine the height of the sensor blade, subtract 31.75 mm (1.25 in)
from the recorded measurement.
1
2
1. Fuel level transducer
2. Height of the sensor blade
6. Use the result from the step 5 to select a fuel level transducer from the
following list.
14.5" 1‐1/2" NTP resistive fuel level transducer
13.5" 1‐1/2" NTP resistive fuel level transducer
20
1
2
3
Fuel level transducer
FST Installation, Operation, and Maintenance Manual
WS011258A
Godwin part number
ACT‐10897
ACT‐10898