Universal Remote Control MSC-400 Programming Manual page 78

70
VS-1006 VOLTAGE POWER SENSOR
The VS-1006 Voltage Power Sensor allows voltage output of a system component to be used to monitor that
U
component's ON/OFF status for power management when the device does not have discrete commands or a
composite video output is not available for video sensing. Some components provide 12V Status Outputs
S
while with other applications, a DC power supply plugged into a component's switched outlet can be used to
I
provide device status.
N
VS-1006 Voltage Power Sensor Features
G
C
C
P
E
26 Sensor Plug – One four-circuit 3.5 mono mini plug connects to one of the Video or Voltage Sensor
D
Inputs on the MSC-400 rear panel.
I
27 Power LED – One red LED illuminates to indicate the VS-1006 is properly connected to and pow-
T
ered from the MSC-400.
O
28 Sensed Voltage Input – One two-pin plug-in connector terminal connects to the AC or DC voltage
output of the device being sensed. POLARITY: Not critical on VS-1006 end. RATING: 3-25 V AC or
R
DC. WIRE GAUGE: Up to 14AWG.
T
O
P
R
O
G
R
A
M
Reference: Features and Parts Type in Section Title
VS-1006 Voltage Power Sensor