Universal Remote Control MSC-400 Programming Manual page 61

Creating a Macro Group for Relay Commands
In order to control the MSC-400 Relays directly from the remote, for functions such as opening and closing
drapes, a Macro Group will need to be setup to create the RF Triggers to activate the Relays from the remote.
To create a Macro Group for Relay Commands:
1 To open the Make Smart Macro window do either of:
a) Click on Program from the Menu Bar then select Make Smart Macro.
b) Right click on MSC-400 within the Model Designer Treeview and select Add Macro Group. Right
click on the new Macro Group and select Make Smart Macro.
Program Menu
c) The Make Smart Macro window will appear.
2 Click the New Group button. The Add Action Group window will appear.
3 In the Add Action Group, type the Name of the New Group. (Relay Macros) Click Ok. In the Macro
Group drop down window, Relay Macros will appear.
4 In the Smart Macro box, double click in the box directly under Smart Macro. The Text Tool will acti-
vate. Type the name of the Relay Smart Macro. (Enter something meaningful like Relay 2 Drape
Open, etc.)
5 Press Enter on the PC KEYBOARD and type the name of the next Smart Macro. (Relay 2 Drape
Close)
Type in Section Title Relays
Model Designer Treeview
Make Smart Macro Group
Treeview Pop up
53
M
S
C
4
0
0
M
A
S
T
E
R
S
Y
S
T
E
M
C
O
N
T
R
O
L
L
E
R