Universal Remote Control MSC-400 Programming Manual page 50

42
Three Unique Macro Modes
There are three unique Macro Modes available; True Mode (Normal), Sensor Mode and Variable Mode. Every
U
button has the potential to do two different macros based on either a variable changing, or how long the user
presses the button. Play with each of the three Macro Modes to get used to them.
S
I
Setting the Macro Mode
N
1 To set the "Macro Mode" of a button, click on the button in the simulator and then click on the
"IF/ElSE" icon in the Macro window toolbar.
G
C
2 An "IF/ELSE" statement appears in the Macro window.
C
P
E
D
3 Double-click on the IF/ELSE statement to open the "IF setting" Macro Mode window.
I
T
O
R
T
O
P
R The proceeding pages describe how to use the three unique modes.
O
True Mode: If the "True Mode" radio button is selected, the macro will be issued every time the button
is pressed. The IF
G
R
Sensor: When the "Sensor" button is selected, the MSC-400 will sense the state of a device whether it
is on or off via the video or voltage sensor and execute the macro.
A
Variable Mode: In "Variable Mode", the button can have two different macros. A unique macro will
M
be issued if the button is pressed when the specified variable is "True". A different macro will be
issued if the button is pressed when the specified variable is "False".
Type in Section Title