Universal Remote Control MSC-400 Programming Manual page 32

24
1 To open the Devices & Routing window, do either of:
a)
b)
U
S
I
N
G
C
2 The Devices & Routing window will appear.
C
P
E
D
I
T
O
R
T
O
3 The Device Name and Control Via columns are NOT CONFIGURABLE in this window.
P
4 All Connected Devices will default to the Target Model: MSC-400.
R
5 All Connected Devices will default to PORT: IR 1. Under the PORT # column, click IR 1 and select
O
the appropriate PORT from the drop down list.
G
NOTE - In a Master/Slave System, each MSC-400 can only control eleven Connected Devices. Port 12 is used
as a Smart Macro Control Buss.
R
A
M
In the CCP MSC Editor menu bar, click Program, then click on Devices & Routing.
In the Model Designer Treeview, right click on Connected Devices then select Add Devices.
Program Menu
Type in Section Title Devices & Routing
Model Designer Treeview
Devices & Routing