Universal Remote Control MSC-400 Programming Manual page 64

56
Programming Macro Triggers to CCP Remotes
Smart Macro Triggers are individual commands sent by a remote to the MSC-400 to initiate the output of a
U
Normal Macro. Once the MSC-400 has been configured, programmed and tested (and the MSC file is saved),
the Smart Macro Triggers need to be dragged into the correct button on the remote control. When any Smart
S
Macro is created in CCP MSC Editor, a corresponding trigger is automatically created 'behind the scenes'. They
I
must however be manually set to the specific buttons on the remote.
N
To drag Smart Macro Triggers to buttons on remotes:
G
1 With the CCP MSC-400 file opened, double click the MX-remote from the Home Designer.
2 On the Menu Bar, click on View and make sure Hot functions is checked.
C
C
P
E 3 Click on the Base station Hot functions tab within the Property window.
D
4 Select your desired base station from the drop down list.
I
T
5 Select a smart macro from the macro group list and drag either to the desired button on the simula-
tor of the MX-980 or MX-6000 or within the macro window. Once the smart macro trigger has been
O
dragged a purple T will appear on the button.
R
T
O
6 Repeat step 5 to program all macro triggers to the appropriate buttons.
P
R
O
G
R
A
M
Type in Section Title Dragging Triggers
Simulator window with Triggers represented by purple T's.