Universal Remote Control MSC-400 Programming Manual page 34

26
Adding RS232 Devices - Optional Step
If your client's system has a device that you intend to control via RS-232, here is how you add a new connect-
ed device that is RS-232. For more information on RS-232, refer to the RS-232 section of this manual.
U
1 Follow steps 1 - 6 under Program Step #2 of Devices & Routing.
S
I
2 Once the New Device window appears, type in a device name in the Device Name field, as it is to
appear in the model designer treeview under Connected Devices.
N
3 In the Device Type section, select Serial Database.
G
4 In the Target section, select IR PORT 1-12 or All as appropriate.
NOTE - In Master/Slave Systems only Ports 7-11 will be available for RS232 control.
C
5 Click Ok to Add the New Device. The new device will appear in the Devices & Routing window.
C
P
6 In the Devices & Routing window, click Save to save the settings and add the new devices to the
model designer tree view.
E 7 Click on the X located at the upper right hand corner of the Devices & Routing window to close.
D
NOTE - Clicking the close button (X) in the Devices & Routing window will close the window without saving
settings.
I
T
Device Properties Window
O
CCP now offers a new feature within the Properties tool box to configure a MSC base station, remote
R control, connected device, macro group and a smart macro. This feature allows for the configuration
of these items via the Properties tab window.
T In order to access the Properties tab:
O
1 Double click on a device within the Model Designer Treeview under the Connected Device
list to see the Properties window. This will give you the option to change the device name,
port, data type and the automatic carriage return. If the properties window is not visible
P
click on the property tab or go to View and check the Properties box.
R
O
G
R
A
M
Adding RS232 Devices Type in Section Title