Universal Remote Control MSC-400 Programming Manual page 66

58
3 Create a name – We suggest RS-232 Testing – and then select an icon to use.
U
S
I
N
G
C
Click on Ok, which will bring up a new option that asks you to select a phone number. We aren't using a
C
modem, so a phone number won't be necessary. Just click on the drop down menu labeled "Connect Using"
P
and select an open COM port (you may have more or less COM ports than you see in the example below). To
check which COM ports you have available, see Note below
E
D
I
T
O
R
T
NOTE:If you have a number of COM ports listed and wish to know which is available, there is a way to exam-
ine all ports. Follow these clicks:START>CONTROL PANEL>SYSTEM> This will open the System Properties
O
Box. Select the HARDWARE tab, then select DEVICE MANAGER. Click on PORTS (COM & LPT) and look for
the port labeled COMMUNICATIONS PORT.
P
4 After selecting your COM port, click on Ok. This brings up a
new box, COM1 PROPERTIES (if you are using a different
R
COM port its name will appear instead of COM1).
O
G
The default values will appear. If you have different communications
R
requirements (as provided in the manufacturers documentation) you can
A
enter them here. Click on OK to accept the settings.
M
Type in Section Title HyperTerminal