Universal Remote Control MSC-400 Programming Manual page 11

Installing CCP on Vista or XP PCs
You Need a Personal Computer With a USB Port
CCP will run on any Pentium II or faster Windows PC. Your PC should be equipped with an adequate amount
of RAM for the operating system you use. CCP is compatible with the Windows 2000, XP and Vista operating
systems. It is not compatible with Windows ME, 98 or previous versions of Windows.
CCP is installed via a self extracting installer file downloadable from our installer only website:
www.urccontrolroom.com.
Installing CCP and Installing the USB Driver
CCP installs with a companion program for communication, Microsoft ActiveSync. You must install both pro-
grams and if un-installing, un-install both programs. To install the two programs, follow these steps:
1 Connect to our installer only website
Downloads, then select CCP to download.
2 A file download Window will open. Click on OPEN.
3 The InstallShield Wizard Window for the CCP will open. Click on NEXT
4 The Install Destination Window will then open. Click on NEXT.
5 The Ready to Install Window will open. Click on INSTALL.
6 The program will install and then show that installation has been completed. Click on FINISH.
7 Now plug in the MSC-400 to the USB port. A Found New Hardware pop up will appear in the sys-
tem tray.
8 Click on the Found New Hardware pop up. The Found New Hardware
wizard opens.
Installing
www.urccontrolroom.com and navigate to Software
3
M
S
C
4
0
0
M
A
S
T
E
R
S
Y
S
T
E
M
C
O
N
T
R
O
L
L
E
R