Universal Remote Control MSC-400 Programming Manual page 67

5 You are now seeing the main HyperTerminal window. This is where you'll be entering your RS-232
commands for testing and it is also where you can examine RS-232 commands that are sent out by
the MSC-400.
Before we can start the testing process, there is one more thing you have to do. By default, feedback (status
return messages) don't appear in HyperTerminal. To ensure that you have sent out the correct commands it
often helps to see the response from the device you are trying to control. To see those response, you'll need to
follow the instructions in step 7.
6 Select the File option, then Properties in the HyperTerminal window. This will open a new window
with two tabs, Connect To and Settings. Choose the Settings option.
Type in Section Title HyperTerminal
59
M
S
C
4
0
0
M
A
S
T
E
R
S
Y
S
T
E
M
C
O
N
T
R
O
L
L
E
R