•
Quality of Service (policy qos command)
Port and VLAN mirroring (policy mirror command)
•
Policy Based Routing (policy pbr command)
•
Assign the policy to an inbound port or VLAN interface using the interface
4.
service-policy in or vlan service-policy in command.
Figure 8-1 shows an overview of traffic class-based software configuration.
1. Determine the traffic
you want to manage
2. Configure a traffic
class (IPv4 or IPv6)
3. Configure a policy
for one or more traffic
classes
4. Apply a service
policy to an interface
Figure 8-1. Traffic Class-Based Configuration Model
Classifier-Based Software Configuration
match Commands
ignore Commands
QoS (policy qos)
PBR (Policy Based
Routing)
Mirroring (policy mirror)
Default class (at end of
policy configuration)
Ports
VLANs
Traffic Classes
rate-limit Command
priority Command
ip-precedence Command
dscp Command
next hop or
destination tunnel
destination Command
default-class action
Command
8-3