HP 3500 Series Advanced Traffic Management Manual page 287

Switch(eth-A2)# int e b4,c2
Switch(eth-B4,C2)# qos dscp 000010
Switch(eth-B4,C2)# int e b1-b3
Switch(eth-B1-B3)# qos dscp 000101
Switch(eth-B1-B3)# int e a2
Switch(eth-A2)# qos dscp 000111
Switch(eth-A2)# show qos port-priority
Port priorities
Port Apply rule
---- ----------- + ------ ----------- ---------------
A1 No-override |
A2 DSCP
A3 Priority
A4 Priority
B1 DSCP
B2 DSCP
B3 DSCP
B4 DSCP
C1 No-override |
C2 DSCP
C3 No-override |
C4 No-override |
Figure 5-32. Global Source-Port Classifier with DSCP-Priority Marking
Radius Override Field. During a client session authenticated by a RADIUS
server, the server can impose a port priority that applies only to that client
session. Refer to the RADIUS chapter in the Access Security Guide for your
switch.
Quality of Service: Managing Bandwidth More Effectively
| DSCP Priority
No-override No-override
| 000111 7
| No-override No-override
| No-override No-override
| 000101 5
| 000101 5
| 000101 5
| 000010 1
No-override No-override
| 000010 1
No-override No-override
No-override No-override
Globally-Configured QoS
Radius Override
No-override
No-override
No-override
No-override
No-override
No-override
5-69