Table of Contents
Advertisement
Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS
HP Switch(config)# show qos dscp-map
DSCP -> 802.p priority mappings
DSCP CodePoint DSCP Value 802.1p tag
-------------- ---------- ----------- --------------------------------
000000
000001
000010
000011
000100
000101
000110
000111
.
Figure 5-10. Display the Current DSCP-Map Configuration
HP Switch(config)# qos dscp-map 000111 priority 7
HP Switch(config)# qos dscp-map 000101 priority 5
HP Switch(config)# qos dscp-map 000010 priority 1
HP Switch(config)# show qos dscp-map
DSCP -> 802.p priority mappings
DSCP CodePoint DSCP Value 802.1p tag
-------------- ---------- ----------- ----------------
000000
000001
000010
000011
000100
000101
000110
000111
.
Figure 5-11. Assigning 802.1p Priorities to the Selected DSCPs
5-38
problem if the configured priorities are acceptable for all applications that
use the same DSCP (see "Notes on Changing a Priority Setting" on page
5-93).
Note that a DSCP codepoint must have an associated priority before you
can use it to mark matching packets.
0
No-override
1
No-override
2
No-override
3
No-override
4
No-override
5
No-override
6
No-override
7
No-override
.
.
2.
Configure the priorities for the DSCPs you want to use to mark packets.
0
No-override
1
No-override
2
1
3
No-override
4
No-override
5
5
6
No-override
7
7
.
.
DSCP Policy name
DSCP Policy name
The DSCPs for this
example have not yet
been assigned an
802.1p priority level.
DSCP policies with an
802.1p priority
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
