Configuring Mst Instance Per-Port Parameters - HP 3500 Series Advanced Traffic Management Manual

Configuring MST Instance Per-Port Parameters

Command
spanning-tree instance < 1..16 > < port-list > path-cost
< auto | 1..200000000 >
spanning-tree instance < 1..16 > < port-list > priority < priority-multiplier >
spanning-tree < port-list > priority < priority-multiplier >
Syntax: spanning-tree instance < 1..16 > < port-list > path-cost < auto | 1..200000000 >
This command assigns an individual port cost for the specified
MST instance. (For a given port, the path cost setting can be
different for different MST instances to which the port may
belong.) The switch uses the path cost to determine which ports
are the forwarding ports in the instance; that is which links to
use for the active topology of the instance and which ports to
block. The settings are either auto or in a range from 1 to
200,000,000. With the auto setting, the switch calculates the
path cost from the link speed:
10 Mbps — 2000000
100 Mbps — 200000
1 Gbps — 20000
(Default: Auto)
Multiple Instance Spanning-Tree Operation
Configuring MSTP
Page
3-39
3-40
3-41
3-39