Creating A Zone Policy - HP 3500 Series Advanced Traffic Management Manual

HP Switch(config)# class zone internal
HP Switch(config-class)# port-list a10-a24
HP Switch(config-class)# exit
HP Switch(config)# class zone external
HP Switch(config-class)# port-list a1
HP Switch(config-class)# exit
Figure 8-15. Example of a Zone Class Configuration

Creating a Zone Policy

1. To create a zone policy that performs zone-specific actions on selected
packets, enter the policy zone <policy-name> command from the global
configuration context.
Context: Global configuration
Syntax: [no] policy zone <policy-name >
Defines the name of a service policy and enters the policy
configuration context, where <policy-name > is a text string
(64 characters maximum). Note that this name should not
be the same as a zone name.
A zone policy consists of one or more actions that are configured for
specific zones.
No action is performed on packets sent to or from ports in the BYPASS
zone. By default, ports are assigned to the BYPASS zone unless you
explicitly assign them to a different zone.
Classifier-Based Software Configuration
Zone Classes
8-43