HP 3500 Series Advanced Traffic Management Manual page 274

Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS
HP Switch(config)# show vlans
Status and Counters - VLAN Information
Maximum VLANs to support : 256
Mark
Primary VLAN : DEFAULT_VLAN
VLAN 1
Management VLAN :
packets
with
VLAN ID Name
priority 2.
------- -------------------------------- + ---------- ----- -----
1
20
30
40
Mark VLAN 20 and 30
packets with priority 5.
Figure 5-22. Displaying the VLANs Available for QoS Prioritization
5-56
Syntax: no vlan < vid > qos
Removes the specified VLAN-ID as a QoS classifier and resets
the priority for that VLAN to No-override.
Syntax: show qos vlan-priority
Displays a listing of the QoS VLAN-ID classifiers currently
in the running-config file, with their priority data.
Example. In this example, 802.1p priorities are assigned to packets received
in VLANs 1, 20, 30, and 40.
DEFAULT_VLAN
VLAN_20
VLAN_30
VLAN_40
Mark VLAN 40 packets
with priority 7.
Enter the following commands to mark VLAN packets that match the specified
VLAN IDs with an 802.1p priority:
| Status Voice Jumbo
| Port-based No
| Static No
| Static No
| Static No
No
No
No
No