Operations; Operating Practices - Intercomp CS750 User Manual

CS750 User Manual
Rev E, April 2018

Operations

Operating Practices

Warning: The crane scale must be operated by qualified designated persons, trainees
under the direct supervision of designated persons, maintenance and test personnel
when in performance of their assigned duties or lifting device inspectors.
Warning: Do not exceed the rated load limit of the crane scale.
Warning: The crane scale shall be applied to the load in accordance with the
instruction manual.
Warning: Prior to lifting, ensure that ropes or chains are not kinked and if multiple lines
are used they are not twisted around each other.
Warning: Ensure that the load is correctly distributed for crane scale use.
Warning: Ensure the temperature of the load does not exceed the maximum
temperature limits of the crane scale.
Warning: Ensure that crane scale movement (swing) is minimized when positioning
over a load.
Warning: Avoid any sudden acceleration of deceleration when moving the load.
Warning: Do not allow crane scale or the lifter to come into contact with any obstruction
when moving the load.
Warning: Do not operate crane scale if it is damaged, malfunctioning or missing parts.
Warning: Do not lift people with the crane scale.
Warning: Do not lift suspended loads over people.
Warning: Do not use the crane scale to pull side loads or to slide loads unless
specifically authorized by a qualified person.
Warning: Do not leave suspended loads unattended.
Warning: Do not remove or obscure warning labels.
Warning: Do not operate the crane scale without having read and understood the
operating manual.
Warning: Stay clear of suspended loads.
Warning: Do not lift loads higher than necessary.
Warning: Do not make alterations or modifications to the crane scale.
Warning: Ensure all portions of the human body are kept clear of all device involved
with the rigging during the lift.
Page 7 of 31