Intercomp CS750 User Manual page 14

7. The screen will display ".". Press the Mode button. The number shown is
the current setting, displayed in minutes the scale will remain idle before it
automatically powers down into standby mode. When the scale powers down
into standby mode, the scale can be powered back on using the wireless
indicator. Setting the sleep mode to "" will disable the function. The flashing
digit may be incremented by pressing the Lb/Kg button or decremented by
pressing the ZERO button. To move one digit to the left, press the TARE button.
When the screen displays the desired number, press the mode button to
continue through the mode menu.
8. The screen will display "". Press the Mode button. The screen displays the
current setting and enables the scale print modes (0 for on-demand, 1 for
continuous). Refer to the "Serial Output" section for additional print information.
The flashing digit may be incremented by pressing the Lb/Kg button or
decremented by pressing the ZERO button. When the screen displays the
desired number, press the mode button to continue through the mode menu.
9. The screen will display "". Press the Mode button. The flashing number is
the current setting of the printer baud rate. The available baud rates are: 1200,
2400, 4800, 9600, 19200, 38400, 57600 and 115200. Press the ZERO button or
the lb/kg button to toggle the display through the baud rate settings. When the
desired setting is displayed, press the mode button to continue through the mode
menu.
10. Message "" will be displayed. Press the Mode button. A number will be
displayed followed by three dashes. This is the scale number. The flashing digit
may be incremented by pressing the Lb/Kg button or decremented by pressing
the ZERO button. To move one digit to the left, press the TARE button. When
the desired number is displayed, press the Mode button.
11. The screen will display "". Press the Mode button. The flashing message
is the current setting. There are 4 protocol settings for the scale; Standard
(""), Low Power (""), Current Loop (".") and Disable ("")
Select the "Lo Pr" setting for wireless operation with the RFX wireless indicator.
Selecting "" will disable wireless operation. Note: Disabling wireless
operation will extend battery life. Press either the zero button or the lb/kg button
to toggle the display through the different settings. When the desired setting is
displayed, press the mode button to continue through the mode menu.
12. The screen will display "". Press the Mode button. The flashing message
is the current setting for the radio enable function. Select the "" setting for
wireless operation with the RFX wireless indicator. Select "" to disable wireless
operation. Note: Disabling wireless operation will extend increase battery life. If
the "" setting is selected, the scale will skip the remaining radio modes and
return to normal weighing. Press either the zero button or the lb/kg button to
toggle the display. When the desired setting is displayed press the mode button
to continue through the mode menu.
Page 14 of 31
CS750 User Manual
Rev E, April 2018
.