Intercomp CS750 User Manual page 15

13. The screen will display "". Press the Mode button. The flashing digit is the
current setting. All scales and indicators in a system must be set to the same
radio channel setting to communicate with each other. The flashing digit may be
incremented by pressing the Lb/Kg button or decremented by pressing the
ZERO button. To move one digit to the left, press the TARE button. When the
desired number is displayed, press the Mode button.
14. The screen will display ".". Press the Mode button. The current setting is
displayed with the right number in flashing mode. All scales and indicators in a
system must be set to the same "Personal Area Network ID" setting to
communicate with each other. The flashing digit may be incremented by pressing
the Lb/Kg button or decremented by pressing the ZERO button. To move one
digit to the left, press the TARE button. When the desired number is displayed,
press the Mode button.
15. The screen will display ".". Press the Mode button. The current setting will
be flashing. This setting is the encryption enable status and will be in either the
on or off mode. Use the Lb/Kg button or the ZERO button to toggle between the
settings. When the desired status is flashing, press the Mode button. If "" was
selected proceed to the next step. If "" was selected skip the next step. The
display will show "" with the right digit in flashing mode. The flashing digit
may be incremented by pressing the Lb/Kg button or decremented by pressing
the ZERO button. To move one digit to the left, press the TARE button. The
number selected will be the encryption key. For security purposes, the encryption
key is not accessible for viewing and will always be displayed as "". All
scales and indicators in a system must be set to the same encryption key setting
to be able to communicate with each other.
selected, press the Mode button. To keep the existing encryption key, enter
"", then press the Mode button to lock the existing key as is.
The screen will display ".". Press the Mode button. The screen will display
16.
a flashing "". This setting restores the radio default settings. The flashing digit
may be incremented by pressing the Lb/Kg button or decremented by pressing
the ZERO button. Setting the number to "3" will restore the default radio settings.
No other numbers will have an effect on radio set-up. When the desired number
is flashing, press the Mode button. The scale will return to normal weighing.
Page 15 of 31
CS750 User Manual
Rev E, April 2018
When the desired number is