Removing The Memory Module; Installing A Wwan Module (Mini-Pcie) - Nexcom ATC 8010 User Manual

Chapter 4: System Setup

Removing the Memory Module

1. Push the ejector tabs which are at the ends of the socket outward. Then
lift up the module and remove it from the socket.
Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

Installing a WWAN Module (Mini-PCIe)

1. Locate the WWAN Mini PCI Express slot (CN11). Insert the module into the
Mini PCI Express slot at a 45 degrees angle until the gold-plated connector
on the edge of the module completely disappears inside the slot. Then
fasten screws into the mounting holes to secure the module.
46
Mounting
Screws
ATC 8010 User Manual