Defining Vlan Information For A Traditional Bridge - 3Com Corebuilder 6000 Software Installation And Release Notes

D-4 A D: A
PPENDIX
Defining VLAN
Information for a
Traditional Bridge
Top-Level Menu
system
ethernet
fddi
display
tokenring
mode
bridge
lowLatency
ip
ipFragmentation
ipx
ipxSnapTranslation
appletalk trFDDIMode
snmp
addressThreshold
analyzer
agingTime
summary
script
stpState
detail
logout
stpPriority
define
stpMaxAge
modify
stpHelloTIme
remove
stpForwardDelay
stpGroupAddress
srBridgeNumber
port
packetFilter
vlan
VLAN
DMINISTERING S
Follow these steps to create a VLAN definition for a traditional bridge, such
as an EFSM or a TMM:
1 From the top level of the Administration Console, enter:
bridge vlan define
2 Enter the slot number for the bridge.
3 Enter the appropriate protocol suite:
SNA,Vines,X.25,NetBIOS,default
4 Enter the integer of the VLAN interface identifier.
5 Enter the VLAN name.
6 Enter the number(s) of the port(s) or
You are prompted to enter the number(s) of the port(s) that can be
assigned to the VLAN.
If you did not choose the IP protocol suite for this VLAN, you have
completed the steps for defining the VLAN.
If you selected the IP protocol suite, follow these steps:
7 Enter to use layer 3 subnet addressing and continue with steps 2
defined
and 3, OR enter
8 Enter the IP subnet address.
(IP,IPX,Apple,XNS,DECnet,
)
all
to not use layer 3 addressing.
undefined
to assign all ports to the VLAN.