3Com Corebuilder 6000 Software Installation And Release Notes page 76

D-6 A D: A
PPENDIX DMINISTERING
VLAN
S
If you did not choose the IP protocol suite for this VLAN, you have
completed the steps for defining the VLAN.
7 If you have selected the IP protocol suite and want to use the Layer 3
address information, enter
if you do not want layer 3 addressing.
If you selected the IP protocol suite, follow these steps:
8 Enter to use layer 3 subnet addressing and continue with steps 2
defined
and 3, OR enter
undefined
9 Enter the IP subnet address.
10 Enter the subnetwork mask.
Example:
Select menu option (bridge/vlan):
Select bridge(s) by slot (2-3,5,10-12) [2-3,5,10-12]:
Enter Protocol Suite (IP,IPX,Apple,XNS,DECnet,SNA,
Vines,X.25,NetBIOS,default):
Enter Integer VLAN Identifier:
Enter VLAN Name:
Slot 10: Ports 1-2 FDDI
Slot 11: Ports 3-10=Fast Ethernet
Slot 12: Ports 11-16=Fast Ethernet
Enter port(s)
Layer 3 Address (undefined, defined):
Enter IP Subnet Address:
Enter subnet mask [255.255.0.0]
The three modules in slot 10, 11, and 12 form a single bridge, so you are
prompted for ports on all three modules.
for layer 3 addressing. Enter
defined
to not use layer 3 addressing.
define
IP
7
SD Marketing
(1-16|all): 1-5,11
158.111.122.0
255.255.255.0
undefined
9
defined