Table of Contents
Advertisement
A-8
A
A: IP M
PPENDIX
Removing a
Multicast Tunnel
Top-Level Menu
system
ethernet
interface
fddi
route
dvmrp
tokenring
arp
display
igmp
bridge
multicast
define
interface
ip
udpHelper
remove
tunnel
ipx
routing
routeDisplay
appletalk
icmpRouterDiscovery
cacheDisplay
snmp
rip
analyzer
ping
script
statistics
logout
Displaying Routes
Top-Level Menu
system
ethernet
interface
fddi
route
dvmrp
tokenring
arp
igmp
bridge
interface
multicast
ip
tunnel
udpHelper
ipx
routing
routeDisplay
appletalk
icmpRouterDiscovery
cacheDisplay
snmp
rip
analyzer
ping
script
statistics
logout
R
ULTICAST
OUTING
To remove an IP multicast tunnel:
1 From the top level of the Administration Console, enter:
ip multicast tunnel remove
2 Enter the slot(s) of the switching module for which you want to remove a
multicast tunnel.
Select IP stack(s) by slot (2,3,7,9-12|all) [12]:
3 Enter the index number(s) of the interfaces associated with the tunnel you
want to remove.
Enter multicast tunnel index [1]:
The tunnel is removed.
To display all available routes in the IP multicast routing table:
1 From top level of the Administration Console, enter:
ip multicast routeDisplay
2 Enter the slot(s) of the switching module for which you want to view IP
multicast routes.
Select IP stack(s) by slot (2,3,7,9-12|all) [12]:
3 The DVMRP and IGMP status appear on the screen.
Slots 9-12 - DVMRP is disabled, IGMP snooping is enabled
2
Advertisement
Table of Contents
