Start And Stop Inverter - Sungrow SG1K5TL User Manual

8.9

Start and Stop Inverter

If input and output conditions meet the related requests, inverter will work
automatically. And if input and output conditions fail, inverter will stop automatically.
If you want start and stop inverter manually, you can operate as the following picture.
Start through LCD
If you want to restart inverter after LCD "stop" operation, you can perform "Start"
operation. And state shown in the default menu will change after "start" operation.
Stop through LCD
If you perform "Stop" operation through LCD, the inverter will stop work immediately.
And state shown in the default menu will change after "stop" operation.
If you want to stop the inverter in emergency, you should first disconnect AC
circuit breaker and then DC circuit breaker. Otherwise it can lead to damage to
inverter and operator.
55
Operation of LCD Menu
8