Start And Stop Inverter; Input Parameter Settings Password - Sungrow SG10KTL User Manual

10 Operation of LCD Display Panel
10.7

Start and Stop Inverter

Main Screen（Press ENTER） →Menu（Press
ENTER）
Press to choose "Start"/"Stop"
and press ENTER
choice.
Press ENTER to confirm.
10.8

Input Parameter Settings Password

The parameter settings are protected by the password. If you want to set the
inverter's parameters, you have to input the correct password.
Step 1 Press ENTER
to move the cursor to "Set-param" menu item and confirm by
Step 2 Press
pressing ENTER
A password confirmation screen will occur.
Step 3
to move cursor right and
Press
input the password 111111.
Step 4 Press ENTER
the "Set-param" sub menu.
68
to confirm the
to enter into "Menu" screen.
.
to confirm the password and enter
×2） → Start/Stop（Press
to
Press
User Manual