Start/Stop - Sungrow PVS-24MH User Manual

5 Electrical Installation
− "0" is corresponding to "Not connected"; and
− "1" is corresponding to "Connected".
If the number of strings actually connected is 23, and the 24
Step 4
to "Not connected", the display of the LED is as follows:
Press and hold both K1 and K2 for 2s to save the foregoing setting.
Step 5

5.7 Start/Stop

The PVS runs automatically once powered on and stops once powered off.
Manually stop the PVS through the internal load-break switch and the padlock.
For details, refer to "Fig. 5-3 Load-break switch state" and "Fig. 5-3 Locking
operations".
32
User Manual
th
string is set