Start/Stop Switch - Sungrow SH8.0RT User Manual

User Manual
Tap the switch to enable the charger.
Tap the switch again to disable the charger, in this case the charger will be in "Disable"
status.

8.11.4 Start/Stop Switch

This switch is not visible in the installer access profile, please login with "user" to see this.
If the charging cable is inserted into the EV, and the parameters are set, the EV-Charger will
be in a "Standby" status. Tap
into "Charging". Pull out the charging cable after the charge is completed.
If the EV-Charger is in a "Unplugged" status after the charging mode is set, the
charging cable may not be inserted in place. Check the connection or reconnect
the cable to the EV.
To stop charging during the charging process, tap
"Charging" to "Complete".
figure 8-24 Parameter Setting
, the EV-Chargerr starts working and turns from "Standby"
. At this time, the charging status from
8 iSolarCloud App
115