Adding A Person On Hold To A Conference Call; Putting A Conference Call On Hold; Dropping The Last Participant From A Conference Call - Avaya J179 Using Instruction

Call Operation
The third participant answers the call.
4. Press the Join softkey.
5. To add another person, press Add and repeat steps 3 and 4.

Adding a person on hold to a conference call

Procedure
1. From the Phone screen, select your active call.
2. Press Conf or Add if you are already in a conference.
3. Select the call on hold that you want to add to the conference.
4. Press Resume to take the call off hold.
5. Press Join or Conf to add the person to the conference call.

Putting a conference call on hold

About this task
Use this procedure to put a conference call of a participant on hold, while the other parties can talk
to each other.
Procedure
1. Press Hold during a conference call.
2. Press Resume or OK or select the call appearance to resume the conference call.

Dropping the last participant from a conference call

About this task
Use the following procedure to drop the last participant added to the conference call. Once you
drop the last added participant, you cannot use the procedure to drop other participants. The
phone plays an error tone if you try to use the drop method again. If you add another participant
after dropping the last added participant, you can use the drop method again to drop this
participant.
Procedure
1. From the Phone screen, select your active call.
2. Press Drop once the conference is up.
The phone drops the last added person from the conference.
March 2018 Using Avaya J169/J179 IP Phones SIP
Comments on this document? infodev@avaya.com
34