Assigning Specific Ring Tone To A Contact - Avaya J179 Using Instruction

Call Operation
2. Enter the first and last name using the dialpad.
3. Choose Yes in the Track Presence field to know the presence information for this contact.
If the presence information is available for this person, the phone displays the presence
icon next to this name of the contact on the Phone screen or the Contact screen.
4. Scroll to the next field.
5. Enter the number.
The contact number can include a-z, A-Z, 0-9, and the following special symbols: comma
(,), space, dash (-), dot (.), + , * , #, $, &, !, ~, ?, +, =, |. A comma (,) inserts a pause during
dialing.
6. Scroll to the next field and choose the type of number that you entered: Work, Home,
Mobile.
7. If you have another number for this contact, select the next field and repeat Step 5 to Step
6.
You can add up to five additional numbers for this contact, but you can designate only one
number as primary.
8. Press Save.

Assigning specific ring tone to a contact

You can configure the ring tone that your phone plays when your phone receives a call from a
contact in your local phone book. Hence, when you receive an incoming call, you can identify the
caller based on the ringer that your phone plays. If you have not specified a ring tone for a contact,
the phone plays the default ring tone.
Procedure
1. Press Contacts.
2. Select the contact for which you want to assign a ring tone, and press Details.
3. Press Edit.
4. Scroll to Ringer.
5. Press OK.
6. Use the Up and Down navigation keys to choose the ring tone of your choice and press
OK.
7. Press Back.
8. Press Save.
March 2018 Using Avaya J169/J179 IP Phones SIP
Comments on this document? infodev@avaya.com
30