Installing Mtz Probe Holder; Final Procedures - GE LOGIQ 400 Service Manual

GE MEDICAL SYSTEMS
REV 5
8–10–5 Installing MTZ Probe Holder
The MTZ probe holder is supplied with a console except for the Japanese system.
1. Install the MTZ probe holder as shown in ILLUSTRATION 8–95.
2. Check that the MTZ probe holder is installed firmly.
8–10–6 Final Procedures
1. Properly dispose of excess material.
2. This completes the installation of the optional MTZ Probe Holder for LOGIQ
Note
MTZ PROBE HOLDER INSTALLATION
ILLUSTRATION 8–95
8–88
TM
LOGIQ 400 SERVICE MANUAL
2127661
400.
OPTIONS