B/W Printer Installation - GE LOGIQ 400 Service Manual

GE MEDICAL SYSTEMS
REV 5
8–4

B/W PRINTER INSTALLATION

8–4–1 Foreword
This section describes for the installation of the optional Sony UP–890 B/W Video Printer LOGIQ
8–4–2 Tools Required
Standard field Service Tool kit.
8–4–3 Time Required
Approx. 45 Minutes
8–4–4 Parts Required
ITEM PART NAME
1. B/W Video Printer
2. B/W Printer Assy
Printer PL
Screw
Screw
3. Power Cable Assy
4. Mini Plug Cable
8–4–5 Functional Check–out
READ and UNDERSTAND these instructions thoroughly before proceeding with the installation. Perform each step in
sequence and check it off when completed. If a problem occurs after completion, go back through the procedure and
check for implementation errors before contacting your Ultrasound Region Engineer.
Possible operational damage. Failure to strictly follow ESD (Electrostatic Discharge) precau-
tions during this upgrade may cause constant or intermittent operational abnormalities.
Strictly follow all precautions.
Check each step as it is completed.
Perform functional checks to verify that the system is functioning properly. Refer to Chapter 4, Functional Checks.
QTY PART #
1
1 P9522XG
1 P9524BZ
4
2
1 P9509LH
1 P9509BC
CAUTION
8–42
TM
LOGIQ 400 SERVICE MANUAL
2127661
400.
REMARKS
Sony UP–890
B/W video printer is
shipped separately
OPTIONS