GE LOGIQ 400 Service Manual page 492

GE MEDICAL SYSTEMS
REV 5
8–5–6 Installing ECG Board Assy (Continued)
Install the ECG Board Assy by screwing two screws ( 2 and 3 ) as shown in ILLUSTRATION 8–59.
4.
Connect the cable ( 1 : CB22) from the Mother Board with the connector on the ECG board assy. Refer to
5.
ILLUSTRATION 8–59.
ECG BOARD ASSY INSTALLATION
ILLUSTRATION 8–59
8–54
TM
LOGIQ 400 SERVICE MANUAL
2127661
OPTIONS