Circuit Protector (Fru No. 504: 15A, Fru No. 505: 7.5A) - GE LOGIQ 400 Service Manual

GE MEDICAL SYSTEMS
REV 9
6–2–64 Circuit Protector (FRU No. 504: 15A, FRU No. 505: 7.5A)
Time Required
1 Hour
Tool Required
Screwdriver
Soldering Iron
Procedure
Refer to ILLUSTRATION 6–88.
1. Turn OFF the system.
2. Remove the Rear CONN Panel Assy (FRU 501). Refer to 6–2–61 on page 6–166.
Remove the soldered cord ( 1 and 2 ).
3.
4. Remove the Circuit Protector toward the direction indicated by the arrow.
CIRCUIT PROTECTOR DISASSEMBLY
ILLUSTRATION 6–88
6–170
LOGIQ 400 SERVICE MANUAL
2127661
RENEWAL PARTS