Cleaning - GE LOGIQ 400 Service Manual

GE MEDICAL SYSTEMS
REV 2
7–2–2

Cleaning

a. Clean the CRT filter.
a–1. Remove the CRT filter from the monitor. Refer to section 6–2–6 or 6–2–16 in Chapter 6, RENEWAL
PARTS.
Equipment damage possibility. Do not use a hydrocarbon glass cleaner on a monitor with an
anti-glare shield. Prolonged use of such cleaners damages the shield.
a–2. Wipe the monitor face and CRT filter using a soft, non-abrasive folded cloth with a glass cleaner.
a–3. Install the CRT filter after cleaning the monitor face and CRT filter. Set the CRT filter on the monitor,
insert the CRT filter clamps ( 1 ), and slide them inwards securely ( 2 ).
Make sure that the filter is securely fixed by the filter clamps. These are important to prevent a hazard
from the filter falling. A "click" sound will be heard when the filter clamp is secured by the lock mecha-
nism.
The CRT Filter Clamps and Escutcheon mounted on the black and white monitor for the LOGIQ 400
B/W console are changed to strengthen the mounting grip of the CRT filter on the escutcheon. With
these changes, the CRT Filter Clamp Kit are provided to improve the installed base systems. This is:
PART NAME
CRT Filter Clamp P Kit
CAUTION
INSTALLING CRT FILTER AND CLAMPS
ILLUSTRATION 7–1
Note
Note
QTY PART #
1 2152056
7–4
LOGIQ 400 SERVICE MANUAL
REMARKS
For CRT FILTER (plastic
filter, P9514BY)
PERIODIC MAINTENANCE
2127661