Mtz Probe Holder Installation - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 7
2–2–5 Unpacking LOGIQ 500 (Continued)
2–2–6 MTZ Probe Holder Installation
One MTZ probe holder is supplied with the LOGIQ 500 console. Assemble the MTZ probe holder at the bottom of
standard probe holder by screwing two screws ( 1
ILLUSTRATION 2–4.
Two sets of screw holes are provided at the bottom of standard probe holder to install the MTZ probe
holder. You can choose the most convenient position for your customer between the two sets of screw
holes.
LABELS ON PACKAGE
ILLUSTRATION 2–3
and 2 : supplied with the starter kit) as shown in
Note
MTZ PROBE HOLDER INSTALLATION (a)
ILLUSTRATION 2–4
2–11
LOGIQ 500 SERVICE MANUAL
P9030TA
INSTALLATION