Table of Contents
Advertisement
Section 1
Back Panel
Key
Feature
Description
1
Power
Plug in the AC power adapter here.
2
Reset
If the RSG2500 experiences trouble connecting to the Internet, briefly press and
release this button to re-establish your connection.
To reset the RSG2500 to its factory default settings, press and hold this button for
more than five seconds. This clears the user settings, including User ID,
Password, IP Address, and Subnet Mask. To reconfigure the RSG2500, see
Section 3, Configuration Utility Reference.
3
LAN
RJ-45 ports to connect up to four computers or other Ethernet devices directly to
1 to 4
the RSG2500 using Ethernet cables. You can connect another router or a switch
to any LAN port to expand your network to more than four devices.
The connected devices can have a 10Base-T or 100Base-T Ethernet adapter. You
can use a straight-through or crossover Ethernet cable.
4
WAN
Connect your modem to this RJ-45 port using the Ethernet cable supplied with the
RSG2500. The connected modem can support 10Base-T or 100Base-T. You can
use a straight-through or crossover Ethernet cable.
5
Pairing
Use this button to simplify Wi-Fi configuration with a compatible dual-mode
Button
handset.
6
Antenna
The antenna used for wireless connections. You can rotate the antenna to obtain
the best signal reception.
1-4
Overview
RSG2500
Advertisement
Table of Contents
