Establishing A Wireless Connection - Motorola RSG2500 User Manual

Section 2

Establishing a Wireless Connection

To connect to the RSG2500 wirelessly, a computer must have an 802.11b or 802.11g
wireless adapter installed. If all wireless security and encryption are disabled on the adapter
and the RSG2500, the computer will automatically connect to the RSG2500.
Motorola ships the RSG2500 with all wireless security measures disabled. For information
about security defaults on your wireless adapter, refer to its documentation.
CAUTION!
Connect at least one computer to an RSG2500 Ethernet port to perform configuration.
Do not attempt to configure the RSG2500 over a wireless connection.
The default RSG2500 settings provide no wireless security. After your wireless LAN is
operational, be sure to enable security.
2-4
Wireless connection
Installation
RSG2500