Wireless Range And Transmission Speed; Electrical Connection; Establishing Your Connection To The Rsg2500 - Motorola RSG2500 User Manual

Residential seamless mobility gateway
Hide thumbs Also See for RSG2500:
Table of Contents

Advertisement

Section 2

Wireless Range and Transmission Speed

The following table lists the expected wireless range. It is only a guide. Your actual
throughput and distance may vary. The radio waves radiate out in a donut-shaped pattern.
The waves travel through walls and floors, but transmission power and distance are affected.
Data Rate
54 Mbps
11 Mbps
5.5 Mbps
1 or 2 Mbps

Electrical Connection

The RSG2500 has no On/Off switch. It is powered on by plugging in its power adapter.
1
Connect the power adapter to the Power port on the back of the RSG2500.
2
Plug the power adapter into an unswitched, grounded, and surge-protected AC power
outlet. The Power LED on the front panel lights green when connected properly.

Establishing Your Connection to the RSG2500

You can now establish your first wired network connection:
We recommend following the step-by-step easy install process on the included
RSG2500 CD-ROM. The Installation Wizard automatically runs when you insert the
RSG2500 CD-ROM in your computer CD-ROM drive. It confirms that the antenna and
electrical connections have been made, and then leads you step-by-step through
setting up your RSG2500.
If you do not wish to use the Installation Wizard, you can manually configure this first
wired connection.
2-2
Open Area
Up to 100 ft (30 m)
Up to 900 ft (275 m)
Up to 1300 ft (396 m)
Up to 1500 ft (457 m)
Closed Area
Up to 60 ft (18 m)
Up to 160 ft (49 m)
Up to 200 ft (61 m)
Up to 300 ft (91 m)
Installation
RSG2500

Advertisement

Table of Contents
loading

Table of Contents