Table of Contents
Advertisement
Configuration Utility Reference
LAN > LAN SETUP
This window enables you to set the RSG2500 LAN IP address and DHCP server options.
We recommend using DHCP to administer your network. All computers on your network
must be configured to obtain an IP address automatically.
Field
LAN IP Address
IP Address
IP Subnet Mask
DHCP Server
Use Router as
DHCP Server
Domain Name
Starting IP
Address
Ending IP
Address
Reserved LAN
Clients
RSG2500
Description
Sets the IP address for your private network. The default is
192.168.0.1.
Sets the subnet mask. The default is 255.255.255.0.
Enables or disables the DHCP server on the RSG2500. The default
is enabled. You can only run one DHCP server on your network. In
bridge mode, the RSG2500 DHCP server is always disabled.
Provides the DNS suffix to clients.
Sets the starting IP address for the DHCP address pool. The default
is 192.168.0.100.
Sets the ending IP address for the DHCP address pool. The default
is 192.168.0.163.
Displays the MAC Address, IP Address, and Host Name for all
reserved IP address LAN clients on your network. Select Add, Edit,
or Delete to add, edit, or delete an entry.
Section 3
3-7
Advertisement
Table of Contents
